CarPro ClearCut provides exceptional cut in very little time whilst creating a minimal amount of dust!

While the cut is extraordinary, the finish is also quite impressive! With the capability of removing scratches as deep as P1000, ClearCut is theperfect tool for a 2-step job on any paint or even 1-step on medium-hard paint.

Features:

• Saves time
• Zero Fillers
• Low dusting
• Removes P1000 grit and up
• Body shop safe
• Compatible with both Dual Action and Rotary machine
• Compatible with a variety of foam, microfiber, and wool pads

Directions:1.Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
2.Spread product across a section
3.Raise speed to HIGH speed with LOW pressure
4.Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
5.Increase pressure with each pass, finishing down with heavier pressure
6.When scratches are gone or polish has been worked through, wipe clean with a microfiber towel
7.Clean Pad
8.Move to next section, Apply 6 – 8 pea size drops to pad and repeat steps 2-7.

Detailing Tips:

– If needed, follow with CarPro Reflect.

– If coating the vehicle with CQuartz, we recommend CarPro Reflect Finishing Polish for finishing