The metal polishyou’ve been waiting for has arrived! With MetalliCut, CarPro set out to redefine the limits of a metal polish and we believe they have! Noexpense was spared in the design of MetalliCut… With diamond abrasive powders to compliment the diminishing abrasive compound, CarPro created a fast cutting metal polish that finishes down to an extreme gloss! Not only does MetalliCutsave time and produce superior results in general but is safe even on soft metals!

MetalliCut is the go to metal polish for professional detailers and enthusiastslooking to improve or perfect their exhaust tips, chrome or aluminum wheels, bumpers and metal trim! For a betterthan new shine, pair MetalliCut with your machine polisher and one of our polishing pads!

Bring on the Shine and get a bottle of MetalliCut today!

Features:

• Diamond & Diminishingabrasives
• Produces an extreme shine!
• Effective on all types of metals including stainless steel, aluminum, and chrome
• Can be used by hand or machine
• Safe on soft metals
• Easy to use

Directions:

By hand:

1. Apply a small amount of MetalliCut to anAll Purpose Microfiber Terry Towelor wire wool depending on the metal type and goal
2. Using firm pressure, work Metallicut into the metal surface until the product becomes less opaque
3. Use anAll Purpose Microfiber Terry TowelorEagle Edgeless 500 Microfiber Towelto buff away any additional residue
4. Repeat steps 1-3 if necessary

By machine:

1. Apply 6-8 drops of MetalliCut to a firm foam polishing pad
2. Spread MetalliCut on the surface at speed 1-2
3. Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved
4. Using a cleanAll Purpose Microfiber Terry TowelorEagle Edgeless 500 Microfiber Towel, remove excess residue
5. Repeat steps 1-3 as necessary

By foam cone or buffing ball:

1. Apply a liberal amount of MetalliCut to the chosen tool.
2. Spread MetalliCut at low speed.
3. Increase the speed of the drill and use a medium to high speed until the abrasives are broken down
4. Using a clean microfiber towel, remove excess residue
5. Repeat steps 1-3 as necessary